It is currently May 26th, 2017, 2:23 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: FS/ (RARE) ZEN "RDE" ZM-1 mallet BRAND NEW uncutt/ungripped
PostPosted: June 30th, 2012, 10:17 pm 
Offline

Joined: October 16th, 2009, 11:09 am
Posts: 1091
Location: Mason, Ohio
I've been fortunate enough to come across a couple of these ZEN "RDE" (Reduced Dimple Error) ZM-1 mallet putters and I'm willing to share that good fortune. I'm keeping 1 for myself.

These are NEW and have never seen a course. Come with a NEW Feeltec V3 grip and magnetic headcover. These retailed for $325 when they were released and are 100% CNC milled from premium grade 303 stainless and composite mixed materials.

I can cut to your specified length or ship it raw. It is 36.25" uncut.

Just some more about the putter: "The Zen Oracle "RDE" mallet putter is World's first USGA and R&A conforming competition putter that features a built-in "direct feedback" training system. It's already proven to reduce the scores of the top 200 Tour & Amateur Players. Zen aperture is used to perform comprehensive training routines which remove the most common faults and compensations in the putting stroke such as: incorrect path, deceleration, centered striking on the face, timing and rhythm. By placing a ball into the club head, the player can "hold" or "release" the ball during the swing and so confirm the correct acceleration and path of the stroke. Micro ridges are milled into the face for optimum performance, the minimal contact between the ball and putter face help reduce adverse affects the dimples have on the ball when putting."

They make even the hardest ball feel soft.

$125 shipped

Image
Image
Image
Image
Image
Image
Image
Image
Image


Top
 Profile E-mail  
 
 Post subject: Re: FS/ (RARE) ZEN "RDE" ZM-1 mallet BRAND NEW uncutt/ungripped
PostPosted: June 30th, 2012, 10:28 pm 
Offline
GolfBizTalk Sponsor
User avatar

Joined: October 18th, 2009, 10:17 pm
Posts: 1995
LBlack14 wrote:
I've been fortunate enough to come across a couple of these ZEN "RDE" (Reduced Dimple Error) ZM-1 mallet putters and I'm willing to share that good fortune. I'm keeping 1 for myself.

These are NEW and have never seen a course. Come with a NEW Feeltec V3 grip and magnetic headcover. These retailed for $325 when they were released and are 100% CNC milled from premium grade 303 stainless and composite mixed materials.

I can cut to your specified length or ship it raw. It is 36.25" uncut.

Just some more about the putter: "The Zen Oracle "RDE" mallet putter is World's first USGA and R&A conforming competition putter that features a built-in "direct feedback" training system. It's already proven to reduce the scores of the top 200 Tour & Amateur Players. Zen aperture is used to perform comprehensive training routines which remove the most common faults and compensations in the putting stroke such as: incorrect path, deceleration, centered striking on the face, timing and rhythm. By placing a ball into the club head, the player can "hold" or "release" the ball during the swing and so confirm the correct acceleration and path of the stroke. Micro ridges are milled into the face for optimum performance, the minimal contact between the ball and putter face help reduce adverse affects the dimples have on the ball when putting."

They make even the hardest ball feel soft.

$125 shipped

Image
Image
Image
Image
Image
Image
Image
Image
Image


NICE ! Will it pick the ball out of the cup ?? :???:

_________________
Geek golf distributor
House of Forged distributor
Matrix distributor
ALDILA, INTEGRA,
Discount to GolfBizTalk members


Top
 Profile E-mail  
 
 Post subject: Re: FS/ (RARE) ZEN "RDE" ZM-1 mallet BRAND NEW uncutt/ungripped
PostPosted: July 1st, 2012, 4:22 pm 
Offline

Joined: October 16th, 2009, 11:09 am
Posts: 1091
Location: Mason, Ohio
GO4IT wrote:
LBlack14 wrote:
I've been fortunate enough to come across a couple of these ZEN "RDE" (Reduced Dimple Error) ZM-1 mallet putters and I'm willing to share that good fortune. I'm keeping 1 for myself.

These are NEW and have never seen a course. Come with a NEW Feeltec V3 grip and magnetic headcover. These retailed for $325 when they were released and are 100% CNC milled from premium grade 303 stainless and composite mixed materials.

I can cut to your specified length or ship it raw. It is 36.25" uncut.

Just some more about the putter: "The Zen Oracle "RDE" mallet putter is World's first USGA and R&A conforming competition putter that features a built-in "direct feedback" training system. It's already proven to reduce the scores of the top 200 Tour & Amateur Players. Zen aperture is used to perform comprehensive training routines which remove the most common faults and compensations in the putting stroke such as: incorrect path, deceleration, centered striking on the face, timing and rhythm. By placing a ball into the club head, the player can "hold" or "release" the ball during the swing and so confirm the correct acceleration and path of the stroke. Micro ridges are milled into the face for optimum performance, the minimal contact between the ball and putter face help reduce adverse affects the dimples have on the ball when putting."

They make even the hardest ball feel soft.

$125 shipped

Image
Image
Image
Image
Image
Image
Image
Image
Image


NICE ! Will it pick the ball out of the cup ?? :???:


Now Richard....what ever gave you that idea?


Top
 Profile E-mail  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Yahoo [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO